Product description
Download technical data sheet
Download safety data sheet
Anker Stuy Ankocryl Interior PU Topcoat line is based on a blend of self crosslinking acrylic and polyurethane dispersions. This blend has been chosen to allow for the optimum balance of properties like chemical resistance, scratch resistance as well as resistance to impact and blocking.
The self crosslinking mechanism present raises the properties of the coating to a level of a two pack coating. This is due to the fact that the self crosslinking mechanism is initiating a chemical reaction after evaporation of the water. In that way it is in fact a reactive coating without the downsides of a real 2 pack system like limited potlife and need to mix the paint with hardener prior to use.
Furthermore the latest available technology for pigment dispersion is used to give the best chemical resistance against known aggressive household chemicals like coffee, red wine and alcohol in both dark, pastel and white shades.
✔ Satin sheen
✔ Quick dry
✔ Good coverage
✔ Good block resistance
✔ Low odour
✔ Good scratch and abrasion resitance
✔ Good flow, de-aeration, and surface smoothness
✔ Non-yellowing
✔ Good resistance to household chemicals and skin fat
✔ Can be processed with spraying equipment
Gloss Percentage | Description | Anker Stuy Gloss percentage | Anker Stuy Name | Article code |
<2%-7% | Dead Matt, Flat Matt, Nature Matt, Chalk | 5%-10% | Natural matt | 17-0870 |
12%-17% | Eggshell, Matt, Flat, Velvet, Low Sheen, Dull matt | 15%-20% | Matt | 17-0871 |
25%-30% | Satin, Semi-matt, | 25%-30% | Semi-Matt | 17-0873 |
45-50% | Semi-Gloss, Silk, pearl* | 45%-50% | Semi-Gloss* | 17-0875* Special order |
>70% | Gloss, High Gloss, Glossy, Polish Gloss | 80%-90% | Gloss | 17-0878 |
Product code | 17-0873 |
Dust dry | approx. 1 hour |
Re-coatable | approx. 3-4 hours |
Substrates | Best results are achieved on fine (320 to 400 grit) sanded substrates. When applying on previously applied paint layers, we advise to clean and degrease these well and then sand them. If in doubt about adherence to substrate, test the substrate beforehand. |
Maximum humidity | Between 25 en 75% |
Minimum application temperature | 15°C |
Application Equipment | Airless or airmix spraying |
Sheen | 25%-30% measured at 60° angle |